Renovations

Fig-1-Weeding

Step 1

Thoroughly rake out all the existing joints, removing all weeds and plant growth, including roots.

If Moss or Mould is present treat whole area with Everbuild Moss Away, ALLOW TO DRY THOROUGHLY FOR 48 HOURS BEFORE PROCEEDING, SURFACES & JOINTS MUST BE TOTALLY DRY BEFORE APPLYING
GEO-FIX®.

Fig-2-Pouring-out

Step 2

Carefully open the vacuum-packed bag and sprinkle
Geo-Fix® over the area to be joined. Work in small areas of approx 2-3 square metres at a time. Once open the entire bag must be used within one hour.

Fig-3-Brushing

Step 3

Using a soft brush, push the Geo-Fix® compound into the joints at a 45° angle.

Fig-4-Pointing

Step 4

Firmly compact Geo-Fix® with a pointing tool, refill and repeat ensuring a fully compacted & topped joint. Firm compaction is the key to the successful laying of Geo-Fix®. Ensure Geo-Fix® is finished slightly below the surface.

Fig-5-Finished

Step 5

After application, brush off excess with a soft brush, taking care not to brush out any Geo-Fix® from the treated area. Geo-Fix® will harden over a 2-3 hour period